This Brass Palm Tree Doorbell in pewter creates a seaside motif at your door. Displaying this doorbell will help you project a spirit of relaxed living from the door of your home. Evoking dreamy days of laying on the beach in the shade.This tropical doorbell is crafted using the sand casting technique. It is then hand finished and coated with protective lacquer to withstand the elements. This coastal doorbell is easy to install and will add the nautical personality to your home.
Comes with lighted push button mounting screws
Measures 4.25" W X 5.25" H Projection0.375 inches
Give that coastal feeling to your guest starting at the front door.
Wired Installation Tips
Tips - Wired Doorbell Button Replacement
Tools Needed:
Screwdriver
Wire stripper
Pliers
Your new doorbell button.
First: find the electrical breaker that powers the doorbell system and switch it off.
Next, remove the screws from the old doorbell cover and gently pull it away from the wall.
Remove the two wires coming out from the wall from the two screws on the back of the old button. Check to see if the exposed parts of the wires are clean and not brittle. If not, simply reattach the wires to the two screws on your new doorbell button. If the wires look dirty, rusted or brittle, cut the exposed part off and strip approximately ½ inch of each wire and then attach to the screws. It doesn’t matter which wire goes on which screw.