This unique  Blue Sea Turtle  Doorbell is nickel Plated  to creates a seaside motif at your door. Displaying this doorbell will help you project a spirit of relaxed living from the door of your home.  The sea turtle being the symbol of ocean deep is the perfect pick for a doorbell. This resin doorbell is crafted using the sand casting technique.  This coastal doorbell is easy to install and will add the nautical personality to your home. Colors are even more vibrant then shown.

Cast of durable poly-resin and nickel plated

Comes with lighted push button

Surface mount (comes with mounting screws)

Measures 2 1/4" H X 3 1/4" W  

Give that coastal feeling to your guest starting at the front door.

  Wired Installation Tips

Remove the two wires coming out from the wall from the two screws on the back of

Tips - Wired Doorbell Button Replacement

Tools Needed:

1. Screwdriver
2. Wire stripper
3. Pliers
4. Your new doorbell button.

First: find the electrical breaker that powers the doorbell system and switch it off.

Next, remove the screws from the old doorbell cover and gently pull it away from the wall.

Remove the two wires coming out from the wall from the two screws on the back of the old button. Check to see if the exposed parts of the wires are clean and not brittle. If not, simply reattach the wires to the two screws on your new doorbell button. If the wires look dirty, rusted or brittle, cut the exposed part off and strip approximately ½ inch of each wire and then attach to the screws. It doesn’t matter which wire goes on which screw.

Lastly, screw the new doorbell cover to the wall.

CAUTION - The information is only tips.